Kootenays, BC
HDPE hot tubs built for the East Kootenay's dry cold and big open sky. Lifetime warranty, delivered by route from our BC showrooms, no electrician required.
Built for Cranbrook
Cranbrook sits in a rain shadow between the Rockies and the Purcells, which means less snow piling up than in Fernie or Kimberley up the valley, and more sun through the winter than most of the province gets. It also means a real cold snap when an arctic front settles in, the kind that finds every weak point in a poorly built spa.
An Eco Spa is built for both ends of that. The HDPE shell does not absorb moisture, so there is no freeze-thaw cracking when the temperature drops hard for a week straight in January. The R-40 hard cover holds the heat in through the cold snap, and because the shell is one solid piece rather than a wood-framed cabinet, there is nothing underneath to rot from years of dry summer heat either.
Cranbrook is the hub for the whole East Kootenay, and the acreages, rural properties, and larger in-town lots around here mean there is usually a straightforward spot to put a spa without redesigning the yard around it.
Delivery Coverage
We deliver to Cranbrook and the surrounding East Kootenay by route from our BC showrooms. Before anything is booked we go over site access with you, gate width, driveway surface, where the electrical panel sits, and lock in a delivery date. Both are confirmed before your deposit, not after. No concrete pad, no electrician, and no crane on our end.
Cranbrook, Wycliffe, Moyie
Kimberley, Marysville, Chapman Camp
Fort Steele, Wasa, Ta Ta Creek, Jaffray
8 Models Available
From the compact E1 for a smaller deck to the full-size E6 Deluxe for a big lake property. Every model features the same unbreakable HDPE shell, lifetime hard cover, and plug-and-play installation.
2-4 seats · 12 jets
From $11,999
2 seats · 21 jets
From $12,999
2-3 seats · 23 jets
From $14,799
3-4 seats · 21+ jets
From $14,999
2 seats · 21+ jets
From $15,499
6-7 seats · 21 jets
From $17,999
6-7 seats · 34 jets
From $19,999
Not Your Average Hot Tub
One-piece, non-porous construction. Won't crack, fade, or harbour bacteria. How HDPE resists bacteria
R-40, 350lb load rating, never needs replacing. See the lifetime hard cover
3,000x faster-acting than chlorine. 90% fewer chemicals. How the Ecozone system works
No electrician, no concrete pad, no contractor. Usually running within a day or two of delivery. Installation details
Visit Us
The nearest Eco Spa location is our Abbotsford showroom on the Lower Mainland. If a trip to the coast is already on the calendar, it's worth the stop to see the shell and lift the cover in person before you order. Otherwise, we quote East Kootenay orders remotely from photos and measurements, no showroom visit required.
See every model in person. Touch the HDPE shell. Lift the hard cover. No appointment necessary, but booking ahead means we can have the models you want to see ready for you.
Ready?
Delivered to your door. Usually running within a day or two of delivery. Warrantied for life.
Local Notes
Cranbrook does double duty as the retail and services hub for the East Kootenay, so buyers here range from in-town lots to acreages twenty minutes out toward Wycliffe or Wasa. The wider lots and straightforward driveway access common around here usually make placement the easy part of the process, and the region's dry climate means less moisture working against the cover and cabinet over the years than a coastal property would see.
The part worth planning ahead is the panel run on a rural property, since a long distance from the electrical panel to where the tub will sit is the one cost that scales with distance if you go straight to 220V. Every Eco Spa ships wired for both 110V and 220V, so you plug into a standard dedicated outlet on delivery and decide about the 220V upgrade later, once you actually have a quote in hand instead of a guess.
Yes. The HDPE shell does not absorb water, so there is nothing inside it to freeze and crack when an arctic front settles into the valley. The R-40 hard cover, rated to 350 lbs, keeps the heat in through the cold stretch rather than letting it bleed out.
Not to get started. Every model ships wired for both 110V and 220V, so you can plug into a standard dedicated outlet the day it's placed and add a 220V circuit later if you want faster heat recovery. No electrician required for the 110V route.
Yes. There is no concrete pad required since the load spreads across a one-piece base rather than a wood frame, so compacted gravel, pavers, or a rated deck all work. Send photos of the access route and we'll confirm it before your delivery date is set.