Northern BC
HDPE hot tubs built for ranch and rodeo country. Lifetime shell and cover warranty, delivered to Williams Lake by route from our BC showrooms.
Built for Williams Lake
Williams Lake is Stampede country, the working heart of the Cariboo Chilcotin, and the properties around it run from lake-view lots in town to real working ranches out toward Riske Creek and the plateau. A spa here has to be as low-fuss as the rest of the operation.
The HDPE shell handles that without complaint. It's one solid piece with no wood frame to rot and no gelcoat to chip, so it holds up on a working property the same way it would anywhere else, through interior cold snaps, dry summers, and years of actual use rather than careful handling.
Whether you're in town near the lake or out on acreage past Esler, the setup is the same: level ground, a standard outlet, and about 15 minutes a month keeping the water in shape instead of a weekend project.
Delivery Coverage
We deliver to Williams Lake and the surrounding Chilcotin by route from our BC showrooms. We confirm your delivery date and go over site access, driveway, gate width, panel location, before your deposit, not after. No concrete pad, no electrician, no crane on our end.
Williams Lake, Esler, Skyline
100 Mile House, Horsefly, 150 Mile House
Likely, Riske Creek, Alexis Creek
8 Models Available
From the compact E1 for a smaller deck to the full-size E6 Deluxe for a big lake property. Every model features the same unbreakable HDPE shell, lifetime hard cover, and plug-and-play installation.
2-4 seats · 12 jets
From $11,999
2 seats · 21 jets
From $12,999
2-3 seats · 23 jets
From $14,799
3-4 seats · 21+ jets
From $14,999
2 seats · 21+ jets
From $15,499
6-7 seats · 21 jets
From $17,999
6-7 seats · 34 jets
From $19,999
Not Your Average Hot Tub
One-piece, non-porous construction. Won't crack, fade, or harbour bacteria. How HDPE resists bacteria
R-40, 350lb load rating, never needs replacing. See the lifetime hard cover
3,000x faster-acting than chlorine. 90% fewer chemicals. How the Ecozone system works
No electrician, no concrete pad, no contractor. Usually running within a day or two of delivery. Installation details
Visit Us
The nearest Eco Spa showroom is our Abbotsford location on the Lower Mainland. If you're already making the drive to the coast, it's worth the stop to see the shell and cover firsthand. Otherwise, we quote Williams Lake and Chilcotin orders remotely from your photos and measurements, no showroom visit necessary.
See every model in person. Touch the HDPE shell. Lift the hard cover. No appointment necessary, but booking ahead means we can have the models you want to see ready for you.
Ready?
Delivered to your door. Usually running within a day or two of delivery. Warrantied for life.
Also Serving
Local Notes
A lot of the properties around Williams Lake are working acreages and ranches rather than tidy subdivision lots, and that changes what actually matters in a hot tub. Durability and low maintenance beat fancy features, which is why a one-piece HDPE shell with no wood frame or gelcoat to fail over years of real use fits this part of the Cariboo better than a typical spa built for a suburban backyard.
Wildfire smoke season is a fact of life in the Chilcotin most summers, and rural power and well water are facts of life on most properties out past town. None of that changes how the spa is maintained: keep the cover closed when it's not in use, run on a standard 110V outlet or upgrade to 220V later, and expect about 15 minutes a month of upkeep either way.
Keeping the cover closed when the tub isn't in use keeps ash and debris out of the water. The Ecozone sanitation system and the usual maintenance routine keep working the same regardless of the air quality outside.
No, well water works fine for filling. If it runs hard, mention it when you order so we can flag anything worth watching in the filter housing, but it doesn't rule out an Eco Spa.
No. Every model ships wired for both 110V and 220V, so a standard dedicated outlet gets the tub running on delivery, and you can add a 220V circuit later if your panel supports it and you want faster heat recovery. No electrician is needed to get started.